If you're trying to connect to Wi-Fi and can't find "biocharger_default" on your device, please follow these steps:
- Turn off the BioCharger using the switch on the back. Wait for it to completely power down, then remove and reinsert the Wi-Fi adapter. Use the reset tool to press the reset button located under the LCD screen for 5 seconds. After that, turn the BioCharger back on using the switch on the back. Now, check your device again to see if "biocharger_default" appears in your available networks.
- If "biocharger_default" still doesn't show up, click on the Setup box, then select "Restore Defaults" in the upper left corner. A message will appear—click "OK." After confirming, you should see a message saying "Error getting IP address, defaults restored." Check your device once more to see if "biocharger_default" is now visible.
Related to