Skip to content
  • There are no suggestions because the search field is empty.

What are the steps to take when transporting my BioCharger?

Here is a link to our Packing Your BioCharger Videos!

1. Disassemble the BioCharger *Place each accessory back in the original white box or in protective covering/bubble wrap  

  1. Power off the BioCharger using the switch in the back
  2. Unplug the BioCharger from the wall
  3. Remove the arc rod or black nylon plug
  4. Remove the top white cover
  5. Remove the hexagonal plexiglass outer enclosure
  6. Place the outer enclosure in its box using the foam inserts and bubble wrap
  7. Remove the hexagonal coupling nut from the top of the silver toroid
  8. Remove the small lock washer and one large washer on top of the toroid
  9. Remove the toroid
  10. Remove the one large washer
  11. Remove the USB W-Fi adapter from the base of the BioCharger
  12. Store the arc rod and/or black nylon plug, washers, coupling nut, WiFi adapter and BioCharger Stylus in the original white box or a ziplock bag so they do not become lost.

2. Remove the tube carousel

*Place each accessory back in their original box or in protective covering/bubble wrap

  1. Remove each spectrum tube from the BioCharger by first lifting up on it slightly and then pulling out the bottom of the tube
  2. Place each spectrum tube back in its original box
  3. Place each box around the outside of the bubble wrap and outer enclosure
  4. Carefully lift the carousel up over the secondary coil and away from the BioCharger
  5. Place the carousel inside the outer enclosure fitting it within the foam inserts
  6. Place the top foam insert onto the carousel inside the outer enclosure
  7. Wrap the toroid in bubble wrap and place it on top of the carousel

3. Remove the secondary coil *Only handle the secondary coil by the grey plastic at the top and bottom of the coil  

  1. Slowly turn the secondary coil counter-clockwise using only the grey plastic at the top until it is able to be pulled out of the BioCharger base
  2. Place the coil back in its original box using the padding on the top and bottom

4. Boxing up the BioCharger  

  1. Place the BioCharger base in its box in its protective padding
  2. Place the accessory box in its spot within the base padding
  3. Place the power cords and filter in its box

Shipping  

  1. After you make sure everything is put in the right box and is carefully protected with bubble wrap, you can send the three boxes to the address below:

Advanced Biotechnologies, LLC 860 Route 134, Suite 3 South Dennis, MA 02660